Black Marble Effect Kit with Epoxy resin:
- The 2.49 kg kit (1.66 + 0.83) covers 1 square meter (+ 10 g white Sahara pigment + 10 g black Sahara pigment + 25 ml white dye + 2* 25 ml black colorfun + polishield 100 GLOSS 100 g )
- The 4.15 kg kit (2*1.66 + 0.83) covers 2 square meters (+ 10 g white pigment + 10 g black Sahara pigment +25 ml white dye + 3* 25 ml black colorfun + 2*polishield 100 GLOSS 100 gr)
- The 8.33 kg kit covers 4 square meters (+ 2*10 g white pigment + 2*10 g black Sahara pigment +2*25 ml white dye + 5* 24 ml colorfun neropolishield 100 GLOSS 500 g)
- The 16.66 kg kit covers 8 square meters (+ 4*10 g white pigment + 4*10 g black Sahara pigment +4*25 ml white dye + 10* 25 ml black colorfun + 22*polishield 100 GLOSS 500 g)
It is strongly recommended to add:
- To enhance the appeal of the design: Isopropanol 99.9% (additional option, not included in the price) +9.59 EUR
Each kit includes dyes and pigment in sufficient quantity for the amount of resin required.
Advantages of Epoxy Resin on Kitchen Worktops compared to Black Marble: Economy, Durability and Ease of Renovation
Coating kitchen worktops in epoxy resin instead of using Marbre Noir (Nero Marquina), a fine natural stone, can be motivated by various factors such as cost, durability and ease of renovation. Here is a detailed explanation of these aspects:
Cost: Marbre Noir is a luxury marble with a significantly higher cost than epoxy resin. The high price is due to its beauty, rarity and difficulty in extraction and processing. Epoxy resin, on the other hand, is a synthetic material that can be produced in large quantities at a relatively low cost. This makes epoxy resin a more economical option for those who want a luxurious look without the high price of natural marble.
Durability: While Marbre Noir is tough and durable, it can be prone to scratches, stains and acid damage due to its porous nature. Epoxy resin, once hardened, forms a non-porous surface that is resistant to heat, scratches, and stains, making it particularly suitable for kitchens where the risk of damage is greater. Furthermore, epoxy resin can be repaired more easily than marble in case of damage.
Ease of renovation: Over time, marble countertops may require professional maintenance to remove scratches or stains and restore their original shine. In contrast, epoxy resin tops can be more easily renovated without the assistance of professionals. If the surface becomes scratched or dull, it can be sanded and repainted, restoring the original appearance with less effort and cost than marble.
Choosing between epoxy resin and Marbre Noir depends on individual priorities such as budget, maintenance needs, desired durability and aesthetic preferences. While Marbre Noir offers a unique and luxurious aesthetic that only natural stone can provide, epoxy offers a practical, long-lasting and easily customisable solution for those looking for a more accessible, low-maintenance alternative.
Guide Instructions:
Step N1: Primer
Start by carefully measuring the amount needed to cover the surface based on the consumption of 150 g/m2, making sure to follow the proportions indicated to obtain a homogeneous mixture. Once the base has been prepared, proceed with adding the dye, choosing between white or black depending on your needs. The quantity of colourant to add to the mixture can be measured in a few drops (max 5% by volume). This step is crucial to achieve the desired colour and ensure uniformity of the application.
Before applying the primer, it is essential that the surface intended for treatment is adequately prepared. Sand the surface with a coarse grit (40 or 60) before any operation. Make sure it’s completely clean, using a soft cloth or brush to remove any pigment, dirt or debris. The surface must also be completely dry; residual humidity can compromise the adhesion of the primer and its effectiveness in sealing the surface.
Once the surface is ready, apply the mixture evenly, using a suitable tool such as a brush, roller or spatula, depending on the size of the area to be treated and your personal preference. The key is to get a thin, even layer that can cover the entire area without leaving gaps or excessive product buildup..
After application, it is essential to allow the primer to dry completely before proceeding with further treatments or finishes on the surface. The recommended waiting time is 12 hours; this range may vary slightly depending on environmental conditions, such as humidity and temperature, but offers a good compromise to ensure the mixture has time to dry and adhere properly. During this period, avoid touching or stressing the treated surface to ensure optimal results. Don’t worry if you notice any discrepancies on the surface, the next main pour will level everything perfectly.
Step N2: application
Start by applying masking tape around the perimeter of your countertop to contain the epoxy you’re about to pour. This step is essential to ensure the resin stays where it is needed. After applying the resin, wait about 1.5 hours before gently removing the tape. To ensure coverage is even and complete, plan to use approximately 1.6kg of resin for every square meter of surface area.
When you are ready to mix the resin, use a drill equipped with a paddle mixer for quick and even action (use at low speed), taking about 2 minutes for this operation. If you prefer to mix by hand, be prepared to take double the time. Don’t forget to scrape the sides and bottom of the container halfway through the process with a stick to ensure all the material is mixed well. Next, separate the already mixed resin into different glasses and add the desired colours, mixing the different colours in the different glasses until you obtain an intense and uniform colour per single glass.
To create a striking visual effect, pour the coloured resin in random layers into a larger bucket, being careful not to mix the colours together too much. After filling the bucket, spread the contents over the surface of the worktop, leaving a small amount of resin aside to finish the edges later. To remove trapped air bubbles, gently run a propane torch or heat gun over the surface.
Once the adhesive tapes have been removed, approximately 1.5 hours after application, if there are any dryedges, moisten them slightly by wearing a protective glove to promote an even appearance. Use appropriate tools, such as spatulas or plastic scrapers, to spread and level the resin along the edges, making sure to cover the entire area well. After letting the resin cure for 24 hours, you can apply a clear top coat or PoliShield scratch-resistant paint to further protect the surface.
Finally, for even more refined visual effects, spray 99.9% isopropyl alcohol onto the surface just before the resin begins to fully harden. This will create unique lacy textures. Remember that when you remove the tape, it is essential that the resin is partially hardened, neither too liquid nor completely solid, to avoid unwanted drips.
The information about Resin Pro products is based on the company’s current knowledge and experience and complies with the decisions of the competent authority on admissions. However, this does not exempt the user from carrying out their own examinations and tests due to the number of factors that can affect the processing and application of the product. Since storage and use are beyond Resin Pro’s control and Resin Pro cannot foresee all relevant circumstances, the company disclaims all liability for any damage resulting from improper storage and use.