Penetrating deeply, it significantly reduces water absorption, preventing the formation of mold, algae, and salt efflorescence due to capillary rise of moisture. The treated surfaces are thus consolidated, increasing their durability over time. The product is transparent and non-film forming.
Application
Shake before use.
The surfaces to be treated must be dry, clean, and degreased. Apply one coat of Protector with a brush, spray, or roller, making sure to saturate the joints, any small cracks, and fissures. Within 5 minutes of application, massage the surface with a soft cloth or absorbent paper and remove any excess product. To achieve optimal protection, especially on particularly porous and highly absorbent substrates, it is recommended to apply a second coat of product 24 hours after the first application. The treated surfaces can be walked on 24 hours after the last treatment.
Recommended Surfaces
Particularly suitable for:
Terracotta, porcelain stoneware, natural stone, single-fired ceramics, clinker, cement, porphyry, and particularly porous surfaces.
TECHNICAL CHARACTERISTICS
Appearance: Transparent
Walkable: After 24 hours
Recommended coats: 2
Coverage first coat on less absorbent surfaces: 30 m²/L
Coverage first coat on absorbent surfaces: 10-15 m²/L
Coverage second coat on less absorbent surfaces: 30 m²/L
Coverage second coat on absorbent surfaces: 10-15 m²/L
Interval between two coats: 24 hours
EQUIPMENT CLEANING
Clean the tools immediately after use with turpentine.
STORAGE
Store the can tightly closed and upside down, away from sunlight, in a cool, dry place between +5°C / +30°C.
When stored properly as indicated above, the product has a shelf life of 24 months in its original and unopened container. Do not apply at temperatures below +5°C.
For optimal coverage, apply to substrates between +15°C / +25°C.
WARNINGS
Flammable. Keep away from heat sources, hot surfaces, sparks, open flames, or other ignition sources. Do not smoke.
Keep out of reach of children.
Avoid prolonged exposure to frost.
The information about Resin Pro products is based on the company’s current knowledge and experience and complies with the decisions of the competent authority on admissions. However, this does not exempt the user from carrying out their own examinations and tests due to the number of factors that can affect the processing and application of the product. Since storage and use are beyond Resin Pro’s control and Resin Pro cannot foresee all relevant circumstances, the company disclaims all liability for any damage resulting from improper storage and use.
