ResinGrip – Transparent Anti-Slip Coating for All Surfaces

Invisible and long-lasting safety for any environment.
Guaranteed anti-slip performance on both wet and dry surfaces.
Transparent, non-yellowing: does not alter the original look of the material.
Universal: suitable for ceramic, terracotta, marble, concrete, wood, metal, and plastic.
High wear resistance: even driveable, perfect for high-traffic areas.
Fast drying: walkable after 3 hours, driveable after 12 hours.
European compliance: EU Regulations 305/2011 and 574/2014 – CE EN 1504-2.

Main Applications

• Pools and wellness areas → pool edges, spas, saunas
• Indoor and outdoor stairs → enhanced safety without changing the look
• Garages and driveways → withstands car traffic
• Boats and docks → transparent anti-slip, resistant to fresh and saltwater
• Marble or terracotta floors → protection without altering beauty

How to apply ResinGrip

1. Thoroughly clean the surface (alcohol or acetone, no oil or grease).
2. Mix the components: 2 parts A + 1 part B + 10% C (by weight of part B).
   Example: 100 g A + 50 g B + 5 g C.
3. Mix slowly until homogeneous.
4. Apply with roller or brush.
5. Wait: 3 h → walkable, 12 h → driveable.

Technical Data

• Appearance: Transparent, colorless
• Composition: Two-component cycloaliphatic resin + Anti-slip Powder Additive
• Mixing ratio: A:B = 2:1 (+ C = 10% B)
• Pot life: 30–40 min at 25°C
• Walkable: 3 h
• Driveable: 12 h
• Coverage: 150–180 g/m²
• UV Resistance: Non-yellowing
• Certification: CE EN 1504-2 – DoP available

FAQ

• Is the coating completely transparent?
  → Yes, ResinGrip is invisible and does not alter the original surface.
• Can it be used in wet areas like pools or saunas?
  → Yes, it is specifically designed for surfaces exposed to water and condensation.
• Is it UV and chlorine resistant?
  → Yes, the cycloaliphatic formula ensures excellent resistance.
• Is a primer required before application?
  → No, ResinGrip adheres directly to clean and dry surfaces.