Step-by-Step Guide:
1. Lay out a plastic sheet to protect the work surface. Make sure your silicone moulds are clean and all materials are on hand. Don’t forget to wear disposable gloves and follow the safety instructions.
2. Mix the epoxy resin following the 100:60 mixing ratio (by weight) – 80 g of A and 48 g of B – for a casting thickness of 5-7 mm. Weigh and mix both components thoroughly for 3 minutes, making sure all sides and bottom of the mixing container are encompassed for effective mixing. Let the mixture sit for 2-3 minutes.
3. Divide the mixed mixture into separate containers for each colour you plan to use. Add resin dyes to each container to achieve the desired shades. Mix thoroughly.
4. Layer the colours into one large container without mixing them, allowing them to stack on top of each other. Pour this mixture in layers into the moulds for a dynamic, abstract effect. Alternatively, you can pour each colour into different places in the mould according to your design concept.
5. Let the resin sit for 15-20 minutes, to remove air bubbles. Use a small gas torch (to be passed gently over the surface of the resin) by bursting the air bubbles. Leave your resin artwork undisturbed in a dust-free place for 24-48 hours. Carefully unmould once they have fully hardened.
The information about Resin Pro products is based on the company’s current knowledge and experience and complies with the decisions of the competent authority on admissions. However, this does not exempt the user from carrying out their own examinations and tests due to the number of factors that can affect the processing and application of the product. Since storage and use are beyond Resin Pro’s control and Resin Pro cannot foresee all relevant circumstances, the company disclaims all liability for any damage resulting from improper storage and use.