Completely non-toxic silicone rubber in paste to be directly applied onto the model you want to replicate. Prior to using, it should be mixed with its catalyst paste (in equal parts, 1: 1) until you have a homogeneous mixture. Apply within 3 min.
Due to its non-stick performance on all surfaces, you don’t need to wash the tools after use and it is not necessary to apply other release agents to the model.
+ Viscosity – Mouldable paste,
+ Working time – 2 min
+ Hardness 8 minutes (Shore A): 16
+ Hardness 24h (Shore A): 20
+ Linear shrinkage (After 5 days) <0.1%
+ Weight ratio A / B – 1: 1;
+ Type – non-toxic,
Note: Do not use under 8-10°C [46,4-50 F]. Wear protective gloves and safety glasses both during the mixture procedure and the application.
Packaging should be disposed of in compliance with local rules. For more safety information, please carefully read the Safety Data Sheet of all ingredients.