LIQUIDID EPOXY RESIN FOR CREATIONS / BIJOUX / JEWELS KG 1.6 –
for transparent creations – liquid RESIN for very detailed molds.
LIQUIDISSIMA Epoxy resin is a two-component product based on epoxy resin and relative amino hardener.
Given the specific formulation and longer catalysis times, Liquidissima resin is suggested for castings at least 1 cm thickness.
Two-component epoxy system (composed of 1000g of resin and 600g of hardener) with low viscosity for application in film (1 mm) and castings up to 3 cm thickness.
The formula was developed with the aim of reducing the number of bubbles in the castings as much as possible, thanks to 3 fundamental characteristics: high transparency (water effect), low viscosity and a longer workability time compared to the traditional “TRASPARENT” product.
The excellent resistance to environmental humidity guarantees a glossy and transparent surface.
The main features of this product are:
+ High transparency;
+ Low viscosity;
+ Good chemical resistance;
+ Long workability;
+ Glossy and self-leveling surface.
These characteristics make the LIQUIDISSIMA Epoxy resin ideal for artistic creations and jewelry with particularly elaborate molds and in all applications where the smallest possible number of air bubbles is required within the products themselves.
The LIQUIDISSIMA product can be colored with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%.
Utilization ratio 100:60,
Viscosity: very low (175-225) cps at 25 °C) .
gel time (film 1mm 30C): 3h00′-4h00′,
pot life (100g at 25C°): 45′,
Yellowing: Low (Gardner 1).
Above all, mechanical properties: Medium-High.