Product Data
No Need for Alcohol, Easy to Use and Clean: Just water! Rinse 3D prints with water, saving time and money; ANYCUBIC Wash and Cure machines ensure optimal results.
Low Viscosity, Fast Printing: This high-flow resin requires shorter exposure times during the printing process, enhancing print speed.
No Cracking: This new formula is more resilient than previous versions, reducing the likelihood of model breakage.
Wide Compatibility: Compatible with broad wavelengths from 365-405 nm, suitable for processing animations, cultural and handmade creative models, detailed models, prototypes, and more.
Try a New Way to Wash
A new washing method!
Anycubic Water-Washable Resin helps you save cleaning time and precious money! You only need water to clean your 3D prints after printing.
High Precision, Low Shrinkage
Printing precision is improved due to the low shrinkage rate, allowing each model to be printed with precise details. To ensure stable resin performance, extract the model promptly after cleaning to avoid deformation caused by prolonged immersion in water.
Multiple Choices, No Limitations
Immerse the model in clean water, rinse or wash with ultrasonic cleaning, then dry and wait for complete curing; we recommend using ANYCUBIC Wash & Cure machines for perfect results.
Wide Compatibility and Applications
Compatible with broad wavelengths from 365-405 nm, Anycubic Water-Washable Resin+ is suitable for most resin 3D printers on the market. You can achieve better results with ANYCUBIC LCD-based SLA 3D printers.
Resin Parameters
| UV Wavelength | 365-405nm | Elongation at Break | 8-15% |
| Density | 1,15-1,20g/cm³ | Tensile Modulus | 1600-1800 MPa |
| Viscosity | 150-250 MPa·s (25°C) | Flexural Strength | 30-45 MPa |
| Flexion module | 1500-1600 MPa | Hardness | 80 Shore D |
| Heat Deflection Temperature | 60-65℃ | Tensile Strength | 50-60 MPa |
| IZOD Impact Resistance | 50-60J/m | Shelf Life | 1,5 year |
Model Printing
Instructions for Use
(1) Before Use:
- Shake the liquid resin before use.
- Clean the resin tank and the print platform to keep the bottom of the resin tank transparent to light.
(2) During Use:
- Unscrew the cap and pour the resin into the resin tank according to the equipment specifications.
- Select the correct printing parameters and settings for the print.
(3) After Use:
- After printing, use the appropriate tools for post-processing, including a blade, diagonal pliers, tweezers, containers, and gloves.
- Use a cleaning solution with ethanol (≥95%), lactate, or isopropyl alcohol.
(4) Post-Processing Steps: A. Remove the printed model from the print platform with a blade.
B. Immerse the model in the cleaning solution, rinse or wash with ultrasonic cleaning, then remove it and let it dry. It is recommended to use ANYCUBIC Wash and Cure machines to ensure better results.
C. Perform proper finishing work, such as removing supports, sanding, painting, etc.
Precautions:
- The ideal condition for storing uncured resin is in a cool, dark place at room temperature, protected from light to avoid high temperatures or direct sunlight.
- The recommended operating temperature is 18-35°C; a temperature that is too low can affect the print’s effectiveness. Therefore, the resin can be properly preheated before use (not exceeding 60°C). If the resin pigment settles, it can be used after being mixed or shaken.
- To ensure resin performance, please remove the model promptly after cleaning to avoid prolonged immersion in water.
- To guarantee the mechanical properties of the model, please perform post-print curing promptly after cleaning and drying.
- To ensure ideal performance of the curing material, it is necessary to control the intensity and duration of the light source after curing.
- Therefore, the following steps are recommended:
- The intensity of the mercury lamp or LED light source should be 5-10 mW/m², and the duration should not exceed 1 hour (self-adjusting).
- The sunlight exposure time (in summer) is about 1 hour.
- Prolonged exposure or approach to intense light sources, such as high-power mercury high-pressure lamps, is prohibited.
- It is advisable to print in a dark room or cover with a lid during printing, as the resin is a photosensitive material.
P.S.: The material properties will vary depending on the printing equipment, post-curing method, and testing equipment. For safety information, consult the Safety Data Sheet (MSDS) for this product. If you encounter any issues during use, please do not hesitate to contact us
Frequently Asked Questions
- Is there a difference in dimensional stability compared to alcohol-washable resins?
There is no worse stability difference compared to alcohol-washable resins. Over time, all resins can change. No issues of shrinkage or dimensional stability have been reported. - What is the density of this resin in g/ml?
The density of the Water-Washable resin is between 1.15 and 1.20 g/cm³. It is a modified photopolymer resin with a hydrophilic group, with a viscosity of 200-300 mPa.s at 25°C, a hardness of 80-85D, and a tensile strength of 40-50 MPa. - What parameters should be used if this resin is used with the Photon Mono 2 printer?
Refer to the technical data sheet (TDS) for specific parameters. - What are the advantages of using water-washable resins compared to alcohol-washable ones?
The Water-Washable resin, in addition to ease of cleaning, helps save money by eliminating the need for isopropyl alcohol. The final result is outstanding! - Is it compatible with 2K definition printers (Geeetech ALKAID – LCD)?
Absolutely, it works well with 2K definition printers. - Is it suitable for the Saturn 2?
Anycubic resins are leaders in entry-level resins and are suitable for all LCD printers. However, some users have had difficulty achieving perfect prints with the Saturn 2 8K. - Can I paint with enamels after printing?
Yes, once the resin has been cured with UV light, it can be painted with any type of paint, including solvent-based enamels. - Can this resin be used with Elegoo Mars 2 or similar?
Yes, it is compatible with Mars 2 models and the Mars 3 Pro. - Can the vat also be cleaned with water?
Yes, if it is water-washable resin. Use a soft brush to assist with cleaning. If you only use water-washable resin, remember that the water must be disposed of properly
The information about Resin Pro products is based on the company’s current knowledge and experience and complies with the decisions of the competent authority on admissions. However, this does not exempt the user from carrying out their own examinations and tests due to the number of factors that can affect the processing and application of the product. Since storage and use are beyond Resin Pro’s control and Resin Pro cannot foresee all relevant circumstances, the company disclaims all liability for any damage resulting from improper storage and use.
