3M Perfect-It Gelcoat Light Cutting Polish + Wax
This gelcoat polish leaves a smooth, high gloss wax finish and it protects the epoxy surface.
Formula provides longer wet time for extended product life and easier cleanup.
3M offers the possibility of achieving a perfect polishing through the use of different types of abrasive pastes.
3M GELCOAT LIGHT + WAX 473ml can be used manually or with an orbital polisher to make resin creations shine.
Instructions for use:
Step 1: Clean the surface thoroughly with a cloth.
Step 2: Now you can perform sanding and polishing by hand or with an orbital polisher. We recommend using the lowest possible speed to get the best result.
Attach the abrasive paper to the disc using the self-adhesive Velcro. Start sanding starting from grain P100 or P240 (depending on how much surface you need to remove). Rinse the surface or clean with a wet cloth. For fine sanding, proceed with P600 abrasive paper. Note: Sand the entire headlight evenly with circular movements and light pressure. Moisten the abrasive paper or the polished surface with water from time to time.
Step 3: Now use the P1200 sandpaper. Note: Moisten the abrasive paper or the surface from time to time.
Step 4: Finally, use P2000 sandpaper. Note: Moisten the abrasive paper or the surface with water from time to time. Finally pass the TRIZACT P3000 abrasive paper to finish sanding.
Step 5: Remove the abrasive paper from the polishing disc and attach the supplied sponge to it. Rinse the surface or wipe with a wet cloth to remove any grain that may have become detached from the previous grains.
Step 6: apply 3M GELCOAT LIGHT polishing cream to the slightly wet sponge. Use manually or with an orbital polisher, with wide circular movements, applying light pressure.
Step 7: Clean the surface with plenty of water to remove all residues.
Step 8: enjoy the result !!!